Deprag AST40-1 User Manual

110
11.1.2 MINIMAT–EC-Servo Screwdriver
Parameters Description
Offset gear available Indicates whether an adapter gear is available.
Gear ratio Transmission ratio for the adapter gear
Efficiency Effectiveness of the adapter gear
Direction change Specifies whether the adapter gear causes change of
direction.
Table 35: Adjustable Parameters MINIMAT–EC-Servo Screwdriver
11.2 Default values
11.2.1 Controller
The standard values for master control unit can be set in the web-based user interface in
the System menu area  System Settings. Open the "General" or "Fieldbus" sub-menu
and then click on the button "Default Values".
Alternately, you can set the standard values in the display within the System menu area 
System Settings.
• Select "System Setup" to set the general parameters to standard values.
• Select "User Data" to delete the user data. Only the user "admin" remains with the
standard password 0000.
• Select "Fieldbus" to set the special parameters for the fieldbus to the standard
values.
Select “All” to set all parameters and user data to standard values.
Then touch .
11.2.1.1 Standard values for system settings
Parameters Value
Language English
Units of torque N·m
Main direction of rotation right
Rotation speed reduction active
Beeper Never
Print string @date_iso @time PG: @prog ST:
@step TQ: @torque AN: @angle
@errortext
Process display Display for one measuring system
Fieldbus available no
control by I/O interface inactive
Table 36: Default values
11.2.1.2 Standard values for user data
Parameters Value
Users admin
Password (for Administrator) 0000
Table 37: Standard values - User data
All the other user data were deleted.

Deprag AST40-1 Specifications

General

Brand	Deprag
Model	AST40-1
Category	Controller
Language	English