136
... Reserved
121 Supply voltage error
122 Driver supply nominal 14 Volt error
... Reserved
127
The Directory of the flash file system
could not be read
128
A system file could not be found in the
Flash file system
... Reserved
132
Trial to drive onto the write protected
Flash area
133
The external 24 Volt supply is in
overload
134
The 8V supply for the internal as well
as the screwdriving logic is faulty.
135
Initial stage of the motor controller is
defective
136
Intermediate circuit voltage outside of
tolerance
137
Network supply, frequency or voltage
outside of tolerance
Check network supply
138
Communication has become
unsynchronized
139 Brake resistor overloaded
Troubleshooting not possible
140 I²t has triggered
Check the fitting process and adjust it if
necessary.
If required, consult the DEPRAG Service
Department.
141 Braking resistance overloaded Troubleshooting not possible
Table 46: System error - power unit
To Next Page
Loading...
Need help?
General
