Deprag AST40-1 User Manual

66
IMPORTANT
A backup of the system settings can only be created via the web user
interface (see 10.3.3.2.5 Create / Load Backup).
Figure 42: System setup – Language
Press the key , to get to the next settings page or , to go the previous settings page.
The network settings are shown on the second page of the System Setups. To change the
network settings, press on the individual input fields. Enter the addresses using the
numeric keypad.
Figure 43: System setup – Network
Press the key , to get to the next settings page or , to go the previous settings page.
The date and time for the AST40 sequence controller are set on the third page of the
System Setups.
To change the date and time, press on the individual input fields. Enter the values using
the numeric keypad. Press on , to accept the date and time. Otherwise, the date
and time will not be re-set.

Deprag AST40-1 Specifications

General

Brand	Deprag
Model	AST40-1
Category	Controller
Language	English