Deprag AST40-1 - 10.3 System Settings via Web Interface

90
10.3.3 System Menu Area
The System menu contains all the information on the overall system, e.g. for the sequence
controller and the MINIMAT–EC-Servo Screwdriver.
10.3.3.1 System data
This page displays the unchangeable data as well as the network settings of the AST40
sequence controller. It is identical with the home page.
Figure 80: System data
10.3.3.2 System settings
Most of the settings for the AST40 sequence controller can be dealt with here.
Figure 81: Submenu items - System setup