Deprag AST40-1 User Manual

51
MI_IN_SchrPrg3 BOOL
Input 3 for the screwdriver program (Hardware
interface)
This signal indicates the status of input 3 at the hardware
interface.
(see 6.2.7
I/O interfaces)
MI_IN_SchrPrg4 BOOL
Input 4 for the screwdriver program (Hardware
interface)
This signal indicates the status of input 4 at the hardware
interface.
(see 6.2.7
I/O interfaces)
Analogue_Sensor INT
Condition of the analog sensor
This signal is currently not available yet!
System_Status INT
System status
This parameter indicates the system status of the AST40 –
screwdriving controller.
(for possible status values, see 15.1
System error)
Table 19: Data structure AST40_IN_Signals

Deprag AST40-1 Specifications

General

Brand	Deprag
Model	AST40-1
Category	Controller
Language	English