Deprag AST40-1 User Manual

141
17 Accessories
17.1 Power cord
Designation Product–Code
Power cable KN-AST10/40-EU 385443 A
Power cable KN-AST10/40-US 385443 B
Power cable KN-AST10/40-China 385443 C
17.2 Emergency Stop Connector
Plug-in connector to link interface GX9.
Designation Product–Code
Plug 827507
17.3 AST40 – PC Connection Cable
The cable is used to interconnect the AST40 sequence controller with the company
network or the PC's network interface. This is necessary in order to be able to access the
sequence controller via the web-based user interface.
Designation Product–Code
Patch cable 831902
17.4 Fieldbus modules
Only one module can be used per control unit.
The fieldbus module cannot be used in conjunction with the printer interface.
17.4.1 Profibus
Designation Product–Code
Fieldbus AST40 Profibus 385818 A
17.4.2 Profinet
Designation Product–Code
Fieldbus AST40 Profinet 385818 B
17.4.3 EtherCAT
Designation Product–Code
Fieldbus AST40 Ethercat 385818 C
17.4.4 EtherNet/IP
Designation Product–Code
Fieldbus AST40 EthernetIP 385818 D
17.5 Printer Interface
The printer interface cannot be used in conjunction with a fieldbus module.
Designation Product–Code
AST40 printer interface 385832 A

Deprag AST40-1 Specifications

General

Brand	Deprag
Model	AST40-1
Category	Controller
Language	English