60
9.2 Description of the menu structure
9.2.1 Overview
The main menu can be reached at any time by using the key on the left below the
display.
Figure 32: Main menu
A user must be logged in to work with settings and to use menus which lead to the
interruption of an automatic operation. If no user is logged in, then these menu items are
inactive.
IMPORTANT
The selection of the following sub-menus leads to an interrupt of the
automatic operation:
• Diagnostic I/O interface
• Diagnostic tool test
• Diagnostic fieldbus (if fieldbus is available)
Please ensure by means of the User facility that only authorized persons
make modifications.
9.2.2 Open modules
The list of open modules can be reached at any time using the button on the right
at the bottom of the display.
Figure 33: Open modules
The modules “Process Display” and “Login" or “Logout” are always contained in the list.
Other modules are added whenever a corresponding menu is opened. Menus from the
Diagnostics area are not shown in the list.
To Next Page
Loading...
Need help?
General
