Deprag AST40-1 User Manual

94
Figure 87: System setup – Fieldbus, ProfiNet example
Click on "Set", to accept the settings into the AST40 sequence controller. Click on "Reset"
to reset the changes on the page. Click on "Standard Values" to restore the standard
values (see 11.2.1.3 Standard values for fieldbus systems (optional)).
10.3.3.2.3 Date and time
The date and time can be set for the AST40 sequence controller here.
The current time for the AST40 sequence controller is displayed in the uppermost row.
You have the possibility of assuming the current PC time or of setting the date and time in
the entry fields.
Figure 88: Date / Time
Click on "Save" to set the date and time on the AST40 sequence controller.
10.3.3.2.4 Users (only visible to the user admin)
The users and passwords for access to the AST40 sequence controller are assigned on
this page.
The User Administration is only accessible to the administrator.

Deprag AST40-1 Specifications

General

Brand	Deprag
Model	AST40-1
Category	Controller
Language	English