151
21 EC Declaration of Incorporation
(according to 2006/42/EC dated 09 june 2006, appendix II, No. 1 B for incorporation of partly completed machinery)
s manufacturer of the partly completed machine we declare that:
the essential requirements of the Directive 2006/42/EC and where applicable the other Directives and Stan
dards listed below apply to the specified machine.
the relevant technical documentation is compiled in accordance with part B of ANNEX VII
the relevant technical documentation in accordance with part B of ANNEX VII will be transmitted in re
sponse to a reasonable request by the national authorities in printed form or electronic form (pdf)
Manufacturer DEPRAG SCHULZ GMBH u. CO.
P.O. Box 1352, Germany-92203 Amberg
Carl-Schulz-Platz 1, Germany-92224 Amberg
Authorized Person Mr. Josef Bock, address see manufacturer
for Documentation
Desi
nation
Name
SEQUENCE CONTROLLER
Machine Type _________________________________________________________
Serial Number _________________________________________________________
Year of Manufacture _________________________________________________________
Directives Date
pplied and fulfilled essential requi
ements
Machine directive 2006/42/EC 2006-06
ANNEX I, Article 1.1.2 a) and b), 1.1.3, 1.1.5, 1.3.2, 1.3.4
and 1.5.1 Assembly instructions in accordance with Annex
VII B a
Low voltage directive 2006/95/EC 2006-12 ANNEX I basic requirements
Directive for electromagnetic com-
patibility 2004/108/EC
2004-12 ANNEX I basic requirements
Standards Date Remark
EN ISO 12100 Machine safety
2011-03 fundamental rules, general fabrication directives
EN 60204-1 2007-06
Machine safety; electric equipment of machines, gen er al
requirements
This partly completed machinery must not be put into service until the final machinery into which it is to be
incorpora ted ha s be en declared in conform ity w ith the pr ovisi ons of the D irecti ve 2 00 6/4 2/EC, w here appr o-
priate.
05/07/2013
To Next Page
Loading...
Need help?
General
