Deprag AST40-1 User Manual

68
Figure 46: System setup – General, Page 2
Press the key , to get to the next settings page or , to go the previous settings page.
The general settings on the (optional) fieldbus module are located on the next page of the
System Setups. The specific settings for the built-in fieldbus module (see 11.1.1.2 Fieldbus
system parameters (optional)) can also be entered on this page.
Figure 47: System setup – Fieldbus, example without fieldbus
Figure 48: System setup – Fieldbus, EtherCAT example

Deprag AST40-1 Specifications

General

Brand	Deprag
Model	AST40-1
Category	Controller
Language	English