Deprag AST40-1 User Manual

111
11.2.1.3 Standard values for fieldbus systems (optional)
Profibus:
Parameters Value
Profibus address 64
Table 38: Default values for Profibus
Profinet:
Parameters Value
IP address 10.10.24.10
Net mask 25.255.0.0
Gateway 10.10.20.9
Station name nic 50 repns
Table 39: Default values for Profinet
EtherNet/IP:
Parameters Value
IP address 10.10.24.11
Net mask 255.255.0.0
Gateway 10.10.20.9
DHCP inactive
BOOTP inactive
Table 40: Standard values EtherNet/IP
EtherCAT:
No settings are necessary.
11.2.2 MINIMAT–EC-Servo Screwdriver
The standard values for the MINIMAT–EC-Servo screwdriver can be set in the web-based
user interface in the system menu area  Tool Settings. To do this, click on the button
"Standard Values".
Alternately, you can set the standard values in the display within the System menu area 
Tool Settings. Switch to the screen "Set standard values" and press
.
Parameters Value
Offset gear available No
Gear ratio 1
Efficiency 100%
direction change No
Table 41: MINIMAT–EC-Servo Screwdriver Standard Values

Deprag AST40-1 Specifications

General

Brand	Deprag
Model	AST40-1
Category	Controller
Language	English