59
9.1.3 Selecting between several options
If more than two alternatives are available, e.g. for the language or the torque unit, then all
the alternatives will be displayed in a separate key. The selected alternative is displayed
with a dark background.
Figure 29: Selecting between several options
9.1.4 Text and numerical input
Numerical inputs are required, for example, for the selection of a sequence, specification
of the screwdriving time, setting of date and time and much more.
If you press on the number input field, this opens the numeric keys you can use to enter
the numbers. Depending on the type of input required, numbers with decimals and internal
decimal places are also a possibility.
Text inputting is required, e.g. for the program name. Tap the text input field and a
keyboard will be displayed. Here, letters, numbers, hyphens and space characters can be
entered. A text that is already in the text input field can also be displayed in the display
field of the keyboard.
Figure 30: Numerical block for
numerical input
Figure 31: Keyboard for text input
Press the key , to delete the last character again.
Complete the inputting by pressing on the key . The keyboard closes and the value
entered is accepted.
Press on the key , to close the keyboard and to retain the original value.
IMPORTANT
If the maximum amount of characters is reached, then it is no longer
possible to enter any further characters.
To Next Page
Loading...
Need help?
General
