Registering Milling Burs
19
2. Milling
G
Enter the time from the start of use to the replacement of the milling bur in [Replacement time].
The replacement time varies depending on the milling bur type.
Point: Entering values for [Work time]
When using a previously used milling bur, enter the time in [Work time <1>]� If the second or third milling bur has previously
been used, enter its work time in [Work time <2>] or [Work time <3>], respectively�
H
Click [Save].
The milling bur name and replacement time are applied to the milling bur list.
I
Click [Close].
The [Milling bur registration] window closes.
To Next Page
Loading...
