B
Tilt the coolant tank tray slightly to pour the accumulated coolant into the tank.
C
Remove any milling waste that remains on the tray.
D
Remove the drain cap of the coolant tank, and then drain the coolant.
Note
Dispose of coolant and milling waste appropriately in accordance with local regulations� Do not thoughtlessly dispose of them in
sewers or rivers or dump them in inappropriate locations� Doing so may have an adverse impact on the environment�
E
Remove the coolant lters.
Important
Fluid that has soaked into the coolant lters may spill out� We recommend that you place a towel or something similar below the tank�
Replacing Consumable Parts
75
3. Maintenance
To Next Page
Loading...
