Manuale operativo
CHORUS
Rev. 0 del 06/2012 13
1.4 SUPPLIED MATERIALS
The instrument is delivered in a box including:
• n°1 CHORUS instrument with the software installed
• n°1 bar code reader with cable
• n°1 separate power cable
• n°1 10x concentrated Washing Buffer solution
• n°1 50x concentrated autoimmunity buffer solution
• n°1 2000x concentrated cleaning solution
• n°1 1000x concentrated sanitizing solution
• n°1 empty tank to collect 1 L of Washing Buffer
• n°1 empty tank to collect 2 L of cleaning solution
• n°1 empty tank to collect 1 L of sanitizing solution
• n°1 10 L waste tank
• n°1 drainage tube with standard cap
• n°1 catching tube for Washing Buffer with level sensor for infectious diseases
• n°1 catching tube for Washing Buffer with level sensor for autoimmunity
• n°1 catching tube for cleaning solution with level sensor
• n°1 roll of thermal paper
• n°2 a couple of fuses
• n°1 approved power cable
• n°1 10 mt telephone cable
• n°1 Manual barcode reader with cable
• n°1 Operating Manual
1.5 TECHNICAL DATA
Instrument dimensions
• Length 17,7 in / 45 cm
• Height: 19,7 in / 50 cm
• Width : 27,6 in / 70 cm
• Weight approximately : 99 lb / 45 kg charged on 6, 3 cm
2
/cad area
Characteristics
• Insulation class: I
• Installation category: II
• Pollution grade: 2
• Use: Inside
Bar code reader
Used for test tube and strip code identification. In connection with the dedicated software procedure
installed, it identifies alphanumeric codes with the following characteristics:
• Max resolution 0,125 mm, 5 mils
To Next Page
Loading...
