Diesse Chorus - Connection to a Host-Computer; Emergency; Switching the Instrument off

Manuale operativo CHORUS
38 Rev. 0 del 06/2012
3.4.9 C ONNECTION TO A HOST - COMPUTER
The CHORUS is equipped with an RS232 serial interface, which provides a connection to a Host
Computer. This connection allows the instrument to be programmed and allows the results to be
handled by a centralized system.
The connection is of the Query mode type and the protocol is described in the appendix.
3.4.10 E MERGENCY
In case of emergency, switch off the instrument using the general switch or unplug, this will block all
movement of the parts and interrupt dangerous current.
3.4.11 S WITCHING THE INSTRUMENT OFF
Before switching the instrument off, whenever a test cycle has run, a washing cycle must be performed
to prevent residual salts containing solutions from crystallizing in the circuits and damaging the
instrument and/or invalidating the results.