Diesse Chorus - Insertion of a Strip Code

Manuale operativo CHORUS
Rev. 0 del 06/2012 61
On exiting the editing mode, the selection bar remains
positioned on the code which has just been changed.
fig. 57
ATTENTION
Do not insert patients’ codes with more than 15 characters because they will be considered erroneous
strip codes and will be automatically eliminated by the system (a warning message will appear).
4.5.1.4 Insertion of a strip code
ATTENTION
The Insertion mode must be enabled.
Note:
As the CHORUS automatically recognizes the strip codes, the QC codes (quality control) and the
calibrator codes, the selection bar can be positioned either on the “sample” column or the “test”
column.
Note:
Up to 60 associations can be inserted; after this number the message “C-List full!” will appear.