Manuale operativo
CHORUS
60 Rev. 0 del 06/2012
MODIFICATION THROUGH MANUAL EDITING
The selection bar must be positioned on the line
relative to the sample code to be modified.
fig. 54
By pressing the MOD key, the Modification mode is
enabled:
The selection bar moves to the samples column, the
change column key is enabled and the status bar will
show “Modify”.
Press the Keyb key to enter the editing mode.
fig. 55
Insert the code manually in the editing window.
To save and exit, press the OK key (to exit without
saving, press Cancel).
fig. 56
To Next Page
Loading...
