Manuale operativo
CHORUS
Rev. 0 del 06/2012 45
3.6.6 P
ROGRAMMED MAINTENANCE
To guarantee correct instrument function, periodic maintenance must be programmed.
This includes:
- Cleaning internal parts,
- Replacing worn components,
- Calibrating controls,
and must be performed by trained staff.
The timing of these interventions must be programmed with the Technical Assistance service based on
actual use of the instrument, i.e. the average number of tests/month performed.
A special counter, described in the utility window (see 4.10), shows the real use of the instrument.
Personnel performing the maintenance operations are required to fill out a report where describing the
operations performed, with a list of the parts that were replaced, and indicating the number of tests
performed until the date of the intervention.
A copy of this report has to available for other operators to consult.
To Next Page
Loading...
