Diesse Chorus - Insertion of the First Sample Code

Manuale operativo CHORUS
Rev. 0 del 06/2012 55
4.5.1.1 Insertion of the first sample code
ATTENTION
The Insertion mode must be enabled.
INSERTION BY MEANS OF THE BAR CODE READER
In an empty C-list, the selection bar is not present, and
only the Keyb and Exit keys are enabled.
To start to compile the C-list, the first sample code
must be inserted.
It is therefore necessary to proceed with the reading of
the bar code of the sample, using the bar code reader.
fig. 41
Scanning the bar code leads to its immediate insertion.
The keys MOD, Host, Delete are enabled.
fig. 42