Manuale operativo
CHORUS
4 Rev. 0 del 06/2012
LIMITATIONS AND WARNINGS
The CHORUS instrument is designed to be used exclusively with established DIESSE procedures
which are stored in the instrument memory. The CHORUS instrument is designed to be used with
components manufactured and supplied by DIESSE (strips, diluent solution, washing solution etc.).
Any use which differs from the manufacturer guidelines may lead to increased risk or measurement
errors for which the user assumes complete responsibility.
Any violation of the software protections and test procedures programmed in the instrument memory
will eliminate the guarantee attached to the instrument.
Before installing and using the instrument, carefully read the warnings included in the chapters related
to Safety, Installation and Use.
A brief training is necessary before operating the CHORUS.
All persons operating the instrument must be trained.
DIESSE accepts no responsibility for damage caused directly or indirectly by errors, defects or
incidents, which are the result of untrained personnel operating the CHORUS instrument.
If there is a need for technical intervention, contact your country’s assistance center or the DIESSE
assistance center.
To Next Page
Loading...
