Manuale operativo
CHORUS
72 Rev. 0 del 06/2012
After this the R-list window will open, and may appear as follows:
First case: C-list stored Second case: C-list not stored
fig. 80 fig. 81
Note:
If the previous cycle was interrupted, before entering this window, the instrument will automatically
execute a quick priming of the washers.
Note:
In case 7 days have passed since the last sanitation, before accessing this window a message will
display that alerts the user of the need to execute the sanitation procedure (see 3.6.4).
Note:
If the status of the instrument is not compatible with performance of the cycle (i.e. some functions are
still pending), or in the case of recoverable or fatal errors, it will not be possible to open this window.
Note:
Access to the errors window by pressing the status bar is disabled from this window
Note:
The Keyb key can be disabled depending on the context. The RUN key is disabled in case there are
no processable strips present in the tray.
To Next Page
Loading...
