Manuale operativo
CHORUS
80 Rev. 0 del 06/2012
Value:
Numeric result. In the QC (quality control) out side the acceptability range this information is proceeded by the
character !?
MU:
Units of measure (varies according to the test method used)
Min:
Minimum acceptable limit in the case of QC (quality control)
Max:
Maximum acceptable limit in the case of QC (quality control)
Lot:
Batch number of the strip. The first of the three digits (FD) indicates the code to calculate the production year
(PY) of the test (PY = 2004+FD)
Note:
If during a given run, strips that belong to non-homogeneous families of tests have been processed,
the results will be printed at the end of each sub-session with a specific report.
Note:
In case the working cycle was started disregarding the sanitation request between the header and the
column titles the text “This session was executed on a non sanitized instrument”, will display to indicate
that the results of that session could be invalidated by the state of the hydraulic system.
Note:
In case the cycle was interrupted, only the results of the processed strips will be printed on the report,
followed by an indication of the reason for the interruption.
• Session stopped because of hardware failure
• Session stopped by user
• Session stopped (Washing buffer tank empty)
• Session stopped (Cleaning solution tank empty)
• Session stopped because of a thermostatation problem.
To Next Page
Loading...
