Copying a Preset
To copy one preset to another preset location, begin by selecting the preset you want
to copy, then follow the steps listed above.
Press EXIT at any time during the procedure to abort the store process.
The FOOTSWITCHES perform different functions specific to the mode that has been
selected. Listed below are descriptions of each footswitch’s function within each of
the three Modes.
Preset Levels
The GNX3000 presets each have an independent level control for quick balancing of
the levels between presets. Preset Level is accessed by selecting the WAH – PICKUP
row of the Matrix using the EFFECT SELECT buttons and then adjusting KNOB 5. The
Preset Level adjusts the overall output level of the active Preset and the range is from
0 to 99. Preset Level changes need to be saved and stored to a user preset location
just as any other effect changes. See page 92 for more information on Storing a
Preset
.
GNX3000 Owner’s Manual
93
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
