DigiTech GNX3000 User Manual

1. Press the Utility button. The UTILITY button’s LED lights.
2. Use the prev or next buttons to select
M 1>U 1 (MIDI Mapping).
3. Use the DATA WHEEL to select the incoming MIDI program number you want
to remap. The flashing number to the right of the
M increases and decreases as
you turn the DATA WHEEL.
4. Press the NEXT button. The number in the red numeric display begins flashing.
This number represents the GNX3000 preset number that is selected when the
GNX3000 receives the MIDI program number shown to the right of the
M in
the alpha-numeric display.
5. Rotate the DATA WHEEL to select the preset number the GNX3000 will use
when it receives the selected MIDI program change.
6. When finished, press EXIT
.
MIDI Merge
The MIDI Merge function echoes the incoming MIDI data to the MIDI Out port of
the GNX3000. This is useful when multiple MIDI devices are chained together, and
you want to pass incoming MIDI Data on to MIDI devices downstream from the
GNX3000. The procedure for enabling or disabling the MIDI Merge function is as
follows:
1. Press the UTILITY button located in the Control Panel. The Utility button’s
LED lights.
2. Use the
PREV or NEXT buttons to select midimrge (MIDI Merge). The red
numeric display reflects the current MIDI Merge status
On or OF.
3. Use the DATA WHEEL to select the status.
4. When finished, press EXIT
.
NOTE: Sysex information cannot be merged through the GNX3000.
Factory Reset
This function resets the GNX3000 to its original factory settings. This procedure
erases ALL custom user presets, utility settings, and re-calibration of the EXPRESSION
PEDAL. The procedure for performing a Factory Reset is as follows:
NOTE: Performing this function will erase all user-programmed data. Be sure you
want to erase the memory and start fresh before continuing with this procedure.
1. Press the
UTILITY button. The Utility button’s LED lights.
2. Use the next button to select
RESET ? (Reset) and the STORE button will
begin to flash.
NOTE: This procedure resets ALL user settings. Press the EXIT button now to abort
the factory reset function.
3. Press the STORE button once and the display will show
CONFIRM?.
122
Utilities
GNX3000 Owner’s Manual

DigiTech GNX3000 Specifications

General

Brand	DigiTech
Model	GNX3000
Category	Music Pedal
Language	English