DigiTech GNX3000 User Manual

Expression Pedal Assignment
The GNX3000 has several options for real-time control over effects parameters in
each of its presets. Parameters can be modified during performance both manually
and automatically by several methods. These are referred to as expression controllers
and include the built-in EXPRESSION PEDAL and the Internal LFOs (low frequency
oscillators) Each of these controllers can be programmed specifically for each preset,
giving you many options for manipulating parameters in different ways.
Expression Pedal
The EXPRESSION PEDAL on the GNX3000 can control up to 3 parameters in real time.
Each parameter assigned to the EXPRESSION PEDAL can have specific ranges of how
much the parameter is controlled by using the minimum and maximum controls.
Apply extra pressure to the toe of the EXPRESSION PEDAL to activate the toe switch,
and the EXPRESSION PEDAL switches between the assigned parameters and the Wah.
Expression Pedal Links 1-3
Each preset can have up to 3 parameters assignments to the EXPRESSION PEDAL. Each
assignment has the following assignment options:
1. Parameter Type (see parameter list on page
77
)
2. Min Value
3. Max Value
The procedure for assigning a parameter to the EXPRESSION PEDAL
is as follows:
1. Press either EFFECT SELECT button until the EXPRESSION ASSIGN
row is selected.
2. Press the STATUS
button until the display reads exp pdl1 (Expression Pedal
Link 1),
exp pdl2 (Expression Pedal Link 2), or exp pdl3 (Expression
Pedal Link 3), depending upon which assignment you want to use or the
number of parameters you intend to assign.
3. Rotate KNOB 1 until the parameter appears in the display. See the Expression
Parameter Assignment List on page
77
for a complete list of assignable
parameters.
4. Rotate KNOB 2 to select the minimum value the parameter reaches with the
Expression Pedal in the toe up position.
5. Rotate KNOB 3 to select the maximum value the parameter reaches with the
Expression Pedal in the toe down position.
6. Store your Expression Pedal assignment to your preset. See page
92
for more
information on storing presets.
Wah Pedal
The wah effect can be programmed to have specific heel and toe ranges in each
preset. These settings are configured in the EXPRESSION ASSIGN row of the matrix. To
customize the heel/toe range for the wah effect, follow these steps:
GNX3000 Owner’s Manual
75
GNX3000 Owner’s Manual

DigiTech GNX3000 Specifications

General

Brand	DigiTech
Model	GNX3000
Category	Music Pedal
Language	English