MIDI Channel
The GNX3000 MIDI channel is only used for receiving incoming MIDI data (both
program change and CC data). The GNX3000 does send MIDI program change
commands but will not send CC data. The procedure for selecting the MIDI channel is
as follows:
1. Press the
UTILITY button. The button will light indicating you are in the Utility
menu.
2. Use the
PREV or NEXT buttons to select the midichnl (MIDI Channel). The
numeric display shows the selected MIDI channel.
3. Rotate the DATA WHEEL
to select the MIDI channel. Your choices include 1
through 16, AL (all), and of (off).
4. When finished, press EXIT.
Bulk Dump
This operation performs a System Exclusive (SysEx) MIDI Bulk Dump that uploads
all the GNX3000 presets and utility data to a SysEx librarian. This is useful for making
a backup copy of all your customized settings. The procedure for performing a Bulk
Dump is as follows:
1. Connect a USB cable from the GNX3000 to your computer.
2. On the GNX3000 press the
UTILITY button. The button will light indicating you
are in the Utility menu.
3. Use the
PREV or NEXT buttons to select Bulkdump (Bulk Dump). The STORE
button will flash indicating it must be pressed to begin the bulk dump.
4. Open the application on your computer that you will be using to receive the
Bulk Dump and set it to record.
5. On the GNX3000 press the STORE button to begin the dump. The display reads
SEND BLK, then PRESET 1 and counts up to PRESET65, FSW BANK,
USER AMP, and USER CAB. When the dump is complete the display returns
to BULKDUMP.
6. When finished, press EXIT
.
NOTE: Bulk Dump sends information on the MIDI channel defined in the MIDI
Channel Menu. Bulk Dump can only be sent and received via USB MIDI.
Preset Dump
This operation performs a System Exclusive (SysEx) MIDI Preset Dump that uploads
individual GNX3000 presets to a SysEx librarian or MIDI recording device. This is
useful for making a backup copy of customized presets. The procedure for performing
a SysEx Preset Dump is as follows:
120
Utilities
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
