34
GNX3000 Owner’s Manual
About the GNX3000
Presets
A preset is a named and numbered location of a programmed sound that resides in
the GNX3000. Presets can be recalled with the FOOTSWITCHES or the DATA WHEEL.
The GNX3000 comes with 65 Factory 1, 65 Factory 2, and 65
User presets. The Factory
Presets do not let you store changes to them. The User presets let you store changes.
From the factory, the 65 User presets are exact duplicates from the 65 Factory 1 and
Factory 2 presets. This lets you create your own presets without worrying about losing
any of the original presets. When you select a preset, the name of the preset appears in
the green display and the number of the preset appears in the red numeric display. The
USER LED to the left of the DATA WHEEL lights indicating the User preset is active, or
the FACTORY 1 or FACTORY 2 LED lights indicating a Factory preset is active.
NAME
64
Preset Name Preset Number
LEDs indicate whether a User,
Factory 1, or Factory 2 preset
is active.
Learn-A-Lick
TM
The Learn-A-Lick
TM
function lets you record a nine second passage of music and play
it back as slowly as 1/4 the original speed with no change in pitch. This is very useful
for picking out the notes of a fast guitar solo.
There are five Learn-A-Lick functions. They are:
• Stop (Controlled by FOOTSWITCH 1)
• Rewind (Controlled by FOOTSWITCH 2)
• Record (Controlled by FOOTSWITCH 3)
• Play (Controlled by FOOTSWITCH 4)
• Playback Speed (Controlled by the DOWN/UP FOOTSWITCHES)
Using Learn-A-Lick
1. Connect the player’s headphone output to the LINE INPUTS on the rear panel
of the GNX3000. Set the volume level of the player to match the level of your
guitar.
2. Find the passage you want to record and pause the Tape, CD, or MP3 player.
3. Press and hold FOOTSWITCHES
1 and 2 to enter Learn-A-Lick. The display
34
About the GNX3000
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
