DigiTech GNX3000 User Manual

Select Channel 2 Amp and Cabinet
To assign the Rectified amp to the Channel 2 do the following:
1. Rotate KNOB 4 until the display reads
DualRect (Rectified).
2. Rotate KNOB 5 until the display reads
brit4x12 (British 4x12).
1. Rotate Parameter 4 knob
until Display reads dualrect
2. Rotate Parameter 5 knob
until Display reads brit4x12
Adjust Channel 1 Tone Controls
The Tweed amp that we selected for our Channel 1 assignment uses the factory
default settings for the Gain, EQ, and Level Parameters. Therefore, you may want
to change the settings. To access the tone controls for Channel 1, do the following:
1. Press the TONE Amp Control button.
2. Press the STATUS
button until the display reads ch1 amp and all the
horizontal LEDs will light green indicating that all 5 knobs will adjust Channel
1’s tone controls.
3. Rotate KNOB 1 to adjust the Tweed Amp’s Gain. The range is from
0 to 99.
1. Press the Tone Amp
Control button
2. Press the Status button
until Display reads CH1 AMP
and all LEDs light green
3.-7. Rotate Parameter knobs to
adjust Channel 1’s Gain, EQ Level,
and Amp Level
4. Rotate KNOB 2 to adjust the Tweed Amp’s Bass EQ Level (boost/cut). The
range is from -12 dB
(-12) to +12 dB (12).
5. Rotate KNOB 3 to adjust the Tweed Amp’s Midrange EQ Level(boost/cut). The
range is from -12 dB
(-12) to +12 dB (12).
6. Rotate KNOB 4 to adjust the Tweed Amp’s Treble EQ Level(boost/cut). The
range is from -12 dB
(-12) to +12 dB (12).
7. Rotate KNOB 5 to adjust the Tweed Amp’s Level. The range is from
0 to 99.
82
Creating a Preset
GNX3000 Owner’s Manual

DigiTech GNX3000 Specifications

General

Brand	DigiTech
Model	GNX3000
Category	Music Pedal
Language	English