Triggered Flanger
A Triggered Flanger is the same sound as a regular Flanger but it lets you choose
the starting point of the Flanger sweep. With a regular Flanger, the low frequency
oscillator (LFO) is continually sweeping up and down. Therefore, when you begin to
play, the flanger may be at the top, bottom, or any random point of the sweep. With
a Triggered Flanger, every time the signal exceeds the Sensitivity level setting, the
Flanger begins at the LFO Start Parameter.
Parameter 1
KNOB 2 adjusts the rate (Speed) of the modulation. Ranges from 0 to 99.
Parameter 2
KNOB 3 adjusts the strength the signal must be (senstvty) in order to trigger the
Flanger. Ranges from
0 (strong signals) to 99 (weak signals).
Parameter 3
KNOB 4 selects the Flanger sweep starting point (LFO STrt). Ranges from 0
(bottom of the sweep point) to 99 (top of the sweep point).
Mod Mix
KNOB 5 controls the mix (mod mix) of wet and dry signal. Ranges from 0 (all dry)
to 99 (all wet).
Triggered Phaser
A Triggered Phaser is the same sound as a regular Phaser but it lets you choose the
starting point of the Phaser sweep. In a regular Phaser, the low frequency oscillator
(LFO) is continually changing the phase of the signal. Therefore, when you begin to
play, the phaser may be at any random point of the phase. With a Triggered Phaser,
every time the signal exceeds the Sensitivity level setting, the Phaser begins at the LFO
Start Parameter.
Parameter 1
KNOB 2 adjusts the rate (Speed) of the modulating phase. Ranges from 0 to 99.
Parameter 2
KNOB 3 adjusts the strength the signal must be (senstvty) in order to trigger the
Phaser. Ranges from
0 (strong signals) to 99 (weak signals).
Parameter 3
KNOB 4 selects the Phaser sweep starting point (LFO STrt). Ranges from 0
(bottom of the sweep point) to
99 (top of the sweep point).
Mod Mix
KNOB 5 controls the mix (mod mix) of wet and dry signal. Ranges from 0 (all dry)
to 99 (all wet).
GNX3000 Owner’s Manual
65
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
