DigiTech GNX3000 - Select and Adjust the Chorus; Turn the Delay off

Select and Adjust the Chorus
Next we want to thicken up the sound, by adding a subtle Chorus effect, in the
following manner:
1. Press the EFFECT SELECT DOWN button again and the LED in the Chorus/Mod
row lights.
2. If the display reads off (
Of), press the STATUS button until the display reads on
(On).
3. Rotate KNOB 1 until the display reads
Chorus (Chorus) for the effect type.
4. Rotate KNOB 2 to set the Chorus Speed to
5.
5. Rotate KNOB 3 to set the Chorus Depth to
30.
6. Rotate KNOB 4 to set the PreDelay to
1.
7. Rotate KNOB 5 to set the Chorus Level to
50.
chorus
1. Press Effect Select
Down again until the
Chorus/Mod LED
lights
3. Rotate Knob 1
to select Chorus
2. Press the Status button to
turn on the Chorus/Mod effect
4. Rotate Knob 2
to set the Chorus
speed to 5
5. Rotate Knob 3
to set the Chorus
Depth to 30
6. Rotate Knob 4
to set the Pr
eDelay
to 1
7. Rotate Knob 5
to set the Chorus
Level to 50
Turn the Delay Off
To bypass the Delay, do the following:
1. Press the EFFECT SELECT DOWN button until the LED in the Delay row lights.
2. If the display reads on (
On), press the STATUS button until the display reads off
(Of).
GNX3000 Owner’s Manual
89
GNX3000 Owner’s Manual