Edit the Preset Effects
The next step to creating our example preset involves editing the effects. To edit the
preset, do the following:
1. Press the EFFECT SELECT DOWN button. The display will briefly read
EDIT and
the Matrix LED in the Wah-Pickup row will light.
2. If the display reads
WAH On, press the STATUS button once to turn the Wah off
(since our example does not use a Wah).
wah
OF
1. Press the Effect
Select Down button;
the LED lights on the
Wah-Pickup effect row
2. If necessary, press the
Status button to turn
the W
ah effect off
Select the Pickup Type
In our example preset we use a single coil pickup, but want it to sound like a
double coil humbucker.
1. With the Wah-Pickup LED lit, rotate KNOB 3 until the display reads
SC>Humb.
This makes a single coil pickup sound like a humbucker.
SC>HUMB
OF
1. Rotate Knob 3 until
Display reads sc>humb
GNX3000 Owner’s Manual
87
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
