Reverb
Reverb gives the listener a sense that the music is being performed in various
acoustical environments. It can provide the tight acoustics of a small room, or the
ambience of a huge arena.
Reverb On/Off
The STATUS button turns the Reverb (reverb) on and off.
Reverb Type
KNOB 1 selects the type of Reverb or acoustic environment. The GNX3000
provides ten different environments to choose from including:
studio = Studio
room = Wood Room
club = Club
plate = Plate
hall = Hall
theater = Amphitheater
church = Church
garage = Parking Garage
arena = Arena
spring = Spring
PreDelay
KNOB 2 adjusts the amount of time (PREDeLaY) it takes for the initial sound to
reach the first reflective surface in the simulated environment. Ranges from 0 to
15.
Decay
KNOB 3 adjusts the length of time the Reverb is audible (DECAY). Ranges from 0
to 99.
Damping
KNOB 4 controls the amount of sound which is absorbed (damping) in the
simulated environment. Ranges from 0 to
99.
*Reverb Balance
The Reverb Balance adjusts the left/right balance of the Reverb signal. Ranges
from rvb left 99 to Rvb rght 99.
Reverb Level
KNOB 5 adjusts the level (rvb levl) of the Reverb. Ranges from 0 to 99.
74
GNX3000 Owner’s Manual
Effects and Parameters
*This Parameter is only available using the X-Edit
TM
Editor/Librarian software.
To Next Page
Loading...
