GNX3000 Matrix Functions
The GNX3000 Matrix
NAME
64
AMP/CABINET
SECTION
EFFECTS
SECTION
Effect Select
Buttons
Status Button
Knobs
Amp Control
Buttons
The main panel of the GNX3000 is the Matrix. The Matrix is comprised of two main
sections, AMP/CABINET and EFFECTS. It is used to navigate through the GNX3000’s
amp/cabinet modeling and effects parameters. Upon power up, the GNX3000 defaults
to the TONE row in the AMP/CABINET section and any effects that are enabled within
a preset will have their corresponding LEDs lit in the EFFECTS section of the Matrix.
You can select one of the other three Amp Control rows, CHAN 1 EQ,
GENETX, or
CHAN 2 EQ using the AMP CONTROL
buttons or you can select the different effects
and their parameters using the EFFECT SELECT
buttons. The LED to the left of each
row indicates which row is active, while the STATUS
button and five KNOBS control the
corresponding parameter above or below each knob.
38
GNX3000 Matrix Functions
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
