Rotary Speaker
Rotary Speaker is an emulation of a device that includes a spinning horn and rotor
(woofer). The rotation of these two speakers produces an interesting combination of
sound panning from side to side, as well as a slight pitch change due to the speed of
the sound coming towards, and then going away from the listener.
Parameter 1
KNOB 2 adjusts the rate (Speed) of the spinning speakers. Ranges from 0 to 99.
Parameter 2
KNOB 3 controls the intensity (Depth) of the Effect. Ranges from 0 to 99.
Parameter 3
KNOB 4 controls the Pitch Shift (doppler) effect that is the ratio between the
horn and the rotor positions. Ranges from 0 to 99.
*Parameter 4
Selects the crossover frequency between the horn and rotor. Ranges from 200Hz
to 1500Hz.
Mod Mix
KNOB 5 controls the mix (mod mix) of wet and dry signal. Ranges from 0 (all dry)
to 99 (all wet).
68
GNX3000 Owner’s Manual
Effects and Parameters
*This Parameter is only available using the X-Edit
TM
Editor/Librarian software.
To Next Page
Loading...
Need help?
General
