1. Press the UTILITY control panel button and use the PREV/NEXT arrow
buttons to locate the Bounceback feature. The display will read
BOUNCBAK.
2. Rotate the DATA WHEEL to turn the BounceBack feature on.
3. When finished press the EXIT button.
NOTE: The Preset Bounceback feature only works when the GNX3000 is in
Preset Mode. When Preset Bounceback is enabled, a preset cannot be bypassed
by pressing its footswitch repeatedly.
For more information regarding the footswitch functions for Preset Mode see page 94.
Stompbox Mode
Stompbox Mode is another mode of operation that can be used during a
performance. When Stompbox Mode is active, the DOWN/UP
FOOTSWITCHES
are used to select presets. FOOTSWITCHES
1-4 turn the effects on and off.
FOOTSWITCH 5 is used as a Tap-Tempo switch for setting the delay time during a
live performance.
For more information regarding the footswitch functions for
Stompbox Mode see
page 96.
Record/Drum Mode
When Record/Drum Mode is active, the DOWN/UP FOOTSWITCHES are used for
selecting drum patterns. FOOTSWITCHES
1-5 are used for Hands-Free
TM
control of
the Pro Tracks Plus
TM
software.
For more information regarding the footswitch functions for Record/Drum Mode
see page
98
.
Expression Pedal
The EXPRESSION PEDAL can control three different parameters simultaneously in
each preset. Rock the EXPRESSION PEDAL back and forth to change the values of
the assigned parameters. Each parameter the EXPRESSION PEDAL controls has an
adjustable minimum and maximum range. The EXPRESSION PEDAL also includes a
toe switch that turns on the Wah effect and switches from controlling the parameters
assigned to the EXPRESSION PEDAL and controls the Wah.
See page 75 for more information on Expression Pedal Assignment
.
GNX3000 Owner’s Manual
37
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
