Warping Amp Channels Together
When the Amps and Cabinets in Channel 1 and Channel 2 are dialed in to
suit your taste, we can Warp their characteristics together to create a new
HyperModel. To warp the amps do the following:
1. Press the
GENETX Amp Control button.
2. Rotate KNOB 3 (Warp) knob to blend the Amps and Cabinets together to
create a new unique amp.
1. Press the GENETX
Amp Control button
2. Rotate Parameter 3 knob to warp
amp and cabinet models tog
ether
Save the HyperModel
TM
Now that we have designed our own Amp/Cabinet HyperModel, we need to save
it to one of the 9 User HyperModel locations. This allows us to use it in presets.
To save the HyperModel, do the following:
1. Press the AMP SAVE button until the display reads
NEW AMP and the first
letter (
N) is flashing. For this example, let’s name the HyperModel “Rectwed”
(Rectified Tweed).
2. Rotate the DATA WHEEL to select R as the first letter.
3. Press the NEXT ARROW button to select the next character in the display.
Continue using the DATA WHEEL and NEXT ARROW button until the display
reads RECTWED.
4. When the display reads
RECTWeD, press the AMP SAVE button again.
3. Use the Next arrow button to
select character locations
2. Use the Data Wheel to
change characters
NEW AMP
1., 4. Press the Amp
Save button
GNX3000 Owner’s Manual
85
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
