To Next Page

To Previous Page

Store the Preset

The last step is to store our changes to a User Preset. If we changed presets

or turned the GNX3000 off without storing these settings, it would forget what

we had done and revert back to the original preset. To store the preset, do the

following:

1. Press the STORE button. The first letter in the display begins to flash. Since this

is an example preset, let’s name the preset

examplE.

2. Rotate the DATA WHEEL until the flashing character in the display is an E.

3. Press the NEXT button once and the second character begins to flash.

4. Rotate the DATA WHEEL again until the flashing character is an

X. Continue

using the NEXT button to select the character location and the DATA WHEEL to

change the characters.

3. Use the Next arrow button to

select character locations

2., 4., 6. Use the Data Wheel to

chang

e characters

store

1., 5., 7. Press the Store

button

5. Once the Display reads exampLE, press the STORE button again. The numbers

in the red numeric display are flashing.

6. Rotate the DATA WHEEL to select User Preset 48 as the destination.

7. Press the STORE

button once more to save the preset.

Congratulations! You have successfully created a Preset.

GNX3000 Owner’s Manual

DigiTech GNX3000 User Manual

Other manuals for DigiTech GNX3000