Cabinet Types
Fender, Ampeg, Ashdown, Sunn, Fane, Acoustic, Hartke, Eden, and SWR are trademarks
of their respective companies and are in no way associated with DigiTech
®
.
Editing Amps and Cabinets
Each GNX3000 preset has three channels, Channel 1 (green), Channel 2 (red), and
Warp (yellow). Amp channels 1 and 2 have selectable amps and cabinets. Each
channel has independent controls for gain, level, EQ, and cabinet tuning. The Warp
channel is effectively a mixture of the Channel 1 and 2 amps and cabinets using the
Warp knob in the AMP CONTROLS section of the matrix. When parameter values have
changed, the Store LED lights indicating the preset has been modified and needs to be
stored (see page 92 for more on the storing procedure).
Once you have selected your amps for Channel 1 and 2, you can switch between these,
as well as the Warp channel, using the Amp Channel footswitch (
Stompbox Mode
only) or the STATUS
button (GeNetX row is active) when the preset name is displayed.
The following sections guide you through the process of selecting amps and cabinets,
adjusting amp parameters, performing cabinet tuning, and creating then saving a
Hypermodel
TM
Amp.
46
Amp/Cabinet Modeling
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
