Selecting Presets and Amp Models
Once you’re connected to the GNX3000, you can immediately transform the tone
of your guitar with the 130
Factory presets. (There are also 65 User presets you can
customize; learn how to create a custom preset on page
81
.) Within each preset you
can also select different amp models that will further alter your guitar’s tone.
Presets
Turn the DATA WHEEL to scroll through the presets. The number and name in the
DISPLAYS change as you turn the DATA WHEEL. When you stop turning the DATA
WHEEL, the selected preset is automatically loaded. Play your guitar to hear it.
NAME
64
Preset Bank LEDs
Data Wheel
Look at the Preset Bank LEDs to the left of the DATA WHEEL, and notice that
either the
User, Factory 1 or Factory 2 LED is lit. When you get to the end of one
bank, you start at the beginning of the next bank.
Amp and Cabinet Models
You can choose and customize a virtual amp/cabinet combo to run your guitar
signal through. (In this case, “amp” refers to the head, where all the knobs and
tubes or electronics reside, and “cabinet” refers to the enclosure where the
speakers are mounted.) For example, you can select the
62 bman amp model,
which by default uses two 12-inch speakers in a Blonde cabinet (
Blnd2x12).
Then, if you want to, you can change the cabinet to a British model with four 12-
inch speakers (
Brit4x12), which would result in the sound of a Bassman
®
head
powering British speakers.
NAME
64
GENETX Button
Knob 1 Knob 2
Knob 4
Knob 5
GNX3000 Owner’s Manual
5
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
