DigiTech GNX3000 - Page 131

4. Press the STORE button again and the display will display FACt rsT and then
TOE DowN. You must recalibrate the EXPRESSION PEDAL at this time.
5. While the display reads
TOE DowN, rock the EXPRESSION PEDAL forward (toe
down) and then press the flashing FOOTSWITCH 3
.
6. When the display reads
TOE UP, rock the EXPRESSION PEDAL back (toe up)
and press the flashing FOOTSWITCH 4.
7. The GNX3000 will then restart.
GNX3000 Owner’s Manual
123
GNX3000 Owner’s Manual