6. Connect the GNX3000 to your computer’s USB JACK using the included USB
cable.
ATTENTION: Refer to the “Installing the GNX3000’s Software Suite” section on page
101 before connecting the GNX3000 to the USB port on your PC and using Pro Tracks
Plus.
7. Connect a MIDI keyboard to the GNX3000’s MIDI IN and OUT/THRU JACKS
using 5 Pin MIDI cables.
8. Press the GNX3000’s OUTPUT SETUP
button and select STEROALL as the
output mode using the DATA WHEEL
.
9. Turn Speaker Compensation on for the XLR OUTPUTS
(see page 24).
See page 24 for more information about Speaker Compensation.
GNX3000 Owner’s Manual
7
GNX3000 Owner’s Manual
To Next Page
Loading...
