6-50
Energy & Demand Report, continued
Energy &
Demand report
interface
(continued)
You have the ability to select from the following interval schedules on how often you
want the instrument to monitor energy consumption and generate report files:
Daily - when enabled, monitors data in 24-hour cycle and then starts a new report file.
The instrument will append the filename for data collected every 24 hours.
Weekly - when enabled, monitors data in 7-day cycle and then starts a new report file.
The instrument will append the filename for data collected every 7 days.
Monthly - when enabled, monitors data in 31-day cycle and then starts a new report
file. The instrument will append the filename for data collected every 31 days.
NOTE: Data monitoring will end when memory is full or when monitoring is stopped
manually.
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.com
To Next Page
Loading...
Need help?
General
