C-1
APPENDIX C
Battery Specifications and Replacement Procedure
Overview
Introduction
The internal battery pack used in HDPQ Xplorer functions as the primary power source
and UPS. Always charge the battery fully before using the unit. HDPQ Xplorer will
fully charge its internal battery in four (4) hours.
HDPQ Xplorer uses a non-volatile flash memory for backup that is not operator
replaceable. Data will not be lost if the battery pack is removed. The flash memory will
store data temporarily.
In this appendix
The following topics are covered in this appendix.
Topic See Page
Battery Specifications C-2
Battery Safety Precautions C-3
Battery Pack Replacement C-4
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.com
To Next Page
Loading...
