5-28
Setup Sound
Setup Sound
Audible alarm
When set to ON, the unit will beep when threshold limits are crossed and error
conditions occur. Audible alarms of short (approximately 0.1 second) duration call
attention to an error condition. Alarms of long (approximately 1 second) duration
signal an event trigger.
NOTE: The beep that provides audible feedback to pressing touch screen key is not
affected by this setting.
Action... Result...
STEP 1: From the Instrument
Settings menu screen, press Setup
Sound.
The On/Off function key toggles
between turning the threshold
beeper On and Off each time it is
pressed.
• The unit can provide audible
alarm signals when triggered.
Set up the sound to turn the
alarm On or Off.
• Press Exit to return to the
Instrument Settings menu. Any
changes made will be saved.
HDPQ-519
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.com
To Next Page
Loading...
Need help?
General
