3-5
CH 3/ Real Time Data
Section B
Text Display Meters
Overview
Introduction
Meter mode is enabled by pressing Text Display Meters from the Real-Time Data
menu or by pressing the real-time Meter icon on the work area of the Home Monitoring
page. Text display meter screens are displayed in tabular form.
NOTE: Meter mode operation does not interfere with any of HDPQ Xplorer’s other
monitoring or recording functions. The individual voltage and current channel meter
readings are not affected by the monitoring setup. Turning monitoring of individual
channels off does not affect meter readings.
Metered
parameters
display
The metered parameters available are logically separated into the following tabs:
Standard, Distortion, Unbalance, Advanced Power, Advanced Demand & Energy and
Advanced Flicker. The function keys at the bottom of the meter screens change
depending on the parameter tab selected. Text display meter changes to reflect the
specified set of parameter/channel combination selected. The format of text meter
screens is similar for all, although the amount of data varies. The Exit key returns to the
Real Time Data menu.
HDPQ Xplorer is designed to provide setup as well as data display. Metered parameters
are available for display regardless if they are being journalled under Start Menu >
Wizard Setup > Trigger Limits > Journal Limits.
In this section
The following topics are covered in this section.
Topic See Page
Standard Meter Tab 3-6
Distortion Meter Tab 3-8
Unbalance Meter Tab 3-9
Advanced Meter Tab 3-10
Advanced Demand & Energy Meter Tab 3-11
Advanced Flicker Meter Tab 3-14
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.com
To Next Page
Loading...
Need help?
General
