4-49
CH 4/ Setup Monitoring
Section D
Monitor Same Circuit
Overview
Introduction
Menu options for monitoring become available only after setting up the instrument or
from reading a setup template from memory. You can make use of existing setups for
monitoring using the Monitor Same Circuit key.
Monitor same
circuit
Follow these steps to display the monitoring options menu.
In this section
The following topics are covered in this section.
Action... Result...
STEP 1: From the Start Menu,
press Monitor Same Circuit.
The monitoring options menu will
be displayed.
Monitoring options allow you to
begin monitoring immediately or
at a specified time and date. You
can also manage files in memory,
view setup summary, and/or enter
additional information about the
site that is to be saved with the
setup.
Refer to the particular section for
information on how to start/stop
monitoring and how to view/save
setup configuration.
Topic See Page
Turn Monitoring On/Off 4-50
View/Save Setup Configuration 4-54
HDPQ-430
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.com
To Next Page
Loading...
