Programming
Operating Instructions 581 - 01.0 - 05/2016102
You can quit the input test using the button.
Auto input tst
In the subitem Auto input tst you can test the function of all
input elements.
To perform the automatic input test:
1. Select Au
to input tst.
2. Press the button.
When the status of an input is changed, this input is automati-
cally displayed.
3. You can quit the automatic input test using the button.
S11 Pedal 1
S12 Pedal 2
S13 Pedal 3
RefN Sewing motor
RefX X-axis
RefY Y-axis
RefZ
Z-axis
Input Function
To Next Page
Loading...
