Glossary
Operating Instructions 581 - 01.0 - 05/2016 183
Cutting diameter Defines the diameter of the buttonhole to be cut.
Cutting length Defines the length of the buttonhole, which depends
on
the diameter of the button.
Eyelet diameter See Cutting diameter.
Number of stitches Indicates the number of stitches per minute.
Piece counter Counts the number of sewing cycles run (quantity)
a
fter the respective thread is cut.
Maintenance unit Comprises a water separator and pressure
controller
.
Water separator Filters the condensed water and the dirt from the
compressed air
.
Enriches the air with a certain quantity of oil.
Term Explanation
To Next Page
