SHANGHAI ESURVEY GNSS CO., LTD.
16
To delete the last record, do the following:
1. To select Delete Last Record, press Fn, and press F4 / 4. The following display
shows:
2. Press F4 YES.
4.5 Height Transfer
It is used to determine the height of the instrument by measurements five known points at
most in two faces.
The principle is as follows:
To determine the height of the instrument, do the following:
1. To select Height Transfer, press Fn and PAGE to go to the second page, and
press F1 / 5. HEIGHT TRANSFTER display shows:
To Next Page
Loading...
Need help?
General